UV Clear Fly Finish is for those who believe "five minutes to cure is five minutes too long." No mixing or waiting is required, and it remains workable until exposed to direct sunlight or Loon's UV lamps, at which point it will cure in a matter of seconds.
Available in three types, either thick, thin or flow.
The UV Clear Fly Finish Thin has less viscosity than the original. It is perfect for delicate applications, going on thin without sacrificing curing speed and strength. It can be used to make smaller heads, bodies or wing cases, or to make coat a small thread head... the possibilities are endless.
The UV Clear Fly Finish Flow is the thinnest UV resin available from Loon Outdoors. Flow is thin enough to work as a head cement replacement, but is strong enough to coat heads, bodies and midges. This resin cures within seconds when exposed to Loon’s UV Mega Light or a UV Power Light.
New ½ oz size
New UV Blocking application needles
New Taper-Tip needle prevents clogs
Build fly heads and bodies
Instantly cures with sunlight or UV light
Brush Applicator included
Needle tip included for precision tying
Directions for use
Apply Fly Paint or Fly Finish to fly while indoors or shaded from the sun. Use applicator and/or rotating vise to form into the ideal shape. Expose to sun light or use Loon's UV Mini Lamp or UV Power Light to cure. In direct sun (or when using Loon's UV Lights) hardening should take approximately 15 seconds.